6drc-3 Double-Roll Crusher of Grinding Frit for Glass Plant

• Customization: Available
• Type: Roller Crusher
• Motor Type: AC Motor
• Model NO.: 6DRC-3
• Motor Power: 6*3kw
• Application: Glass Factory
• Materials: Glass Frit and Slag
• Outlet Size: 200-300mm
• Inlet Size: 150×250mm
• Condition: New
• Warranty: 1year
• After-sales Service: 1year
• Series: X65
• Capacity T/H: 3-5
• Industiral1: Coal, Coke, Petroleum Coke, Quicklime, Silica,
• Drive Mode: Motor - Reducer
• Transport Package: Customized
• Specification: Casting steel
• Trademark: YONGLIN
• Origin: Zibo, Shandong, China
• HS Code: 8474201000
• Production Capacity: 5000sets/Year
• Package Size: 230.00cm * 140.00cm * 140.00cm
• Package Gross Weight: 2000.000kg

Product Description

overview

Double-tooth roller crusher is suitable for crushing and coarse crushing operation of medium hard and soft materials with compressive strength less than 240Mpa and humidity less than 35%, such as coal, coke, petroleum coke, quicklime, silica, carbon, glass tube, asphalt, etc., or solid materials with the hardness equivalent to the above, the machine has the characteristics of low maintenance cost, reliable performance, less dust and low noise.

 

Double-toothed roller crusher is equipped with two roller, roller surface is divided into Wolf teeth, ring teeth, straight teeth, large plate teeth, etc., suitable for feed particle size less than 1000mm, finished product particle size requirements of 10-200mm, requiring less powder, more particles of medium or coarse crushing occasions.

 

For example, it is used to break electric coal in thermal power plants and coking plants; Coal mine crushing bulk raw coal; Crushing coke in the steel industry; Pulverized petroleum coke in coal chemical industry; The electronics industry crushed silica; Carbon industry crushing carbon blocks; The solar industry breaks waste glass tubes; Concrete industry crushing lime and asphalt, etc.; Or similar to the above broken occasions.

 

Second, the working principle

 

Double-toothed roller crusher is the use of two wear-resistant alloy tooth roller, the relative rotation of high extrusion pressure to break materials, materials into the two teeth roller gap (V-shaped crushing chamber), by the two teeth roller relative rotation extrusion pressure and shear force, in extrusion, shear and grinding, the material is broken into the required particle size and then sent out by the conveyor equipment.

 

 

Technical parameters of fine crusher series double-tooth roller crusher
No.	Series	Model	Feed Size(mm)	Discharge Size(mu)	Capacity(T/h)	Power(KW)	Drive Mode
1	X65	6DRC-1	0-10	20-300	0.120-0.96	6×2.2	Motor - Piston
2		6DRC-2	0-15	20-300	1-3	6×2.5
3		6DRC-3	0-20	20-300	3-5	6×3
4	X75	6DRC-4	10-20	20-300	5-10	6×3.5
5		6DRC-5	20-30	20-300	10-15	6×4.5
6		6DRC-6	30-50	20-300	15-50	6×7.5