Wk-1 Series No Water Discharge Reclaimer Permanent Magnetic Disk Tailings Recovery Machine

Product Description

Product Description

Working principle: The disk type tailings recovery machine is composed of five parts: main engine, ore unloading device, ore collecting tank, chute and frame. The working principle is that the host disk is installed in the chute, the slurry flows from one end of the chute, and through the gap between the disk and the disk, the magnetic minerals in the slurry are adsorbed on the surface of the disk, and the remaining non-magnetic slurry flows from the other end of the chute. When the host disk rotates, the magnetic minerals adsorbed on the surface of the disk are taken out of the slurry surface. When entering the unloading area, the magnetic minerals adsorbed on the magnetic surface are thrown into the ore collection tank by the unloading device inserted between the gaps of the disk.

 

Equipment features:

 

1, large capacity, high recovery rate, less water consumption.

 

Due to the composite magnetic system composed of polymagnetic technology, the magnetic field depth around the disk is up to. The field strength is high, the gradient is large, and the recovery amount is 2-3 times that of other similar products when used on site.

 

2, easy discharge, magnetic block does not wear.

 

Using moving magnetic field technology, the absorption of mineral powder under the action of water impulse, with the help of moving magnetic field magnetic force, mineral powder automatically gathered near the outer edge of the disk, because the outer edge of the disk is the same magnetic pole (N or S), according to the principle of magnetic field repulsion, the scraper is easy to scrape it down and leave a protective layer on the magnetic surface.

 

3, simple structure, low energy consumption

 

The use of ordinary cycloidal pinwheel reducer, no complex speed control system and complex induction disk discharge device, energy saving 5%-25% than similar products, optimize the mechanical structure, to overcome the disk from the top of the discharge caused by the disk loose, string shaft and other drawbacks. During the operation of the equipment, there is no need to consider mechanical failure except periodically adding lubricating oil and replacing the hanging rubber plate.

 

4, long service life

 

Because the machine uses NdFeb as the magnetic source, it overcomes the shortcomings of the traditional recycling machine, such as non-corrosion resistance, non-high temperature resistance, easy oxidation and fast magnetic attenuation. After careful development of our company's scientific researchers, repeated tests, the successful protection of the strong magnetic block can be significantly extended

Model	SW19	SW30	SW60	SW80	SW100	SW120
Capacity T/H	0.25-0.30	3-5	15-20	40-50	80-100	100-120
Feed particles mm	0-3	0-4	0-6	0-6	0-6	0-8
Feed density %	0-50%	0-50%	0-50%	0-50%	0-50%	0-50%
Recoil of water T/H	1.5-2	4-6	10-15	17-25	40-60	70-90
Concentrate production   (kg/time)	2-3	10-20	30-40	60-70	70-80	80-90
Motor Power kw	0.75	3	5.5	7.5	11.5	18.5
Cone rotational speed	800	600	600	400	360	300
Water Pressure MPa	0.04	0.05	0.16	0.18	0.2	0.25
Overall Size mm	790×785×790	1000*1000*1400	1200*1200*1600	1500*1500*1800	1800*1800*2200	2000*2000*2500
Weight	300kg	1000kg	2000kg	2800kg	3200kg	3800kg